Servomechanism: Difference between revisions
Jump to navigation
Jump to search
RobowaifuDev (talk | contribs) (Created page with "A '''servomechanism''' (or more simply a '''servo''') is an electromagnetic device that converts electricity into controlled motion using negative feedback mechanisms. It can generate linear or circular motion depending on its type. It consists of a mechanical device, such as an electric motor, that is connected to a sensor and a controller. The sensor measures the output of the system and sends it to the controller, which then adjusts the input to the system in order to...") |
(added some examples of servo motors) |
||
| Line 1: | Line 1: | ||
A '''servomechanism''' (or more simply a '''servo''') is an electromagnetic device that converts electricity into controlled motion using negative feedback mechanisms. It can generate linear or circular motion depending on its type. It consists of a mechanical device, such as an electric motor, that is connected to a sensor and a controller. The sensor measures the output of the system and sends it to the controller, which then adjusts the input to the system in order to keep the sensor's output within given parameters. | A '''servomechanism''' (or more simply a '''servo''') is an electromagnetic device that converts electricity into controlled motion using negative feedback mechanisms. It can generate linear or circular motion depending on its type. It consists of a mechanical device, such as an electric motor, that is connected to a sensor and a controller. The sensor measures the output of the system and sends it to the controller, which then adjusts the input to the system in order to keep the sensor's output within given parameters. | ||
== Examples == | |||
Here are examples of servos used in the [[InMoov]] project: | |||
* TowerPro MG995 | |||
* HiTec HS-805BB | |||
* HobbyKing HK15298 | |||
If you want to use them you will need at least something with pins like an [[Arduino]] or [[Raspberry Pi|Raspberry]] and a servo controller board like the [[PCA9685]] is recommended. | |||
Latest revision as of 22:20, 30 January 2024
A servomechanism (or more simply a servo) is an electromagnetic device that converts electricity into controlled motion using negative feedback mechanisms. It can generate linear or circular motion depending on its type. It consists of a mechanical device, such as an electric motor, that is connected to a sensor and a controller. The sensor measures the output of the system and sends it to the controller, which then adjusts the input to the system in order to keep the sensor's output within given parameters.
Examples
Here are examples of servos used in the InMoov project:
- TowerPro MG995
- HiTec HS-805BB
- HobbyKing HK15298
If you want to use them you will need at least something with pins like an Arduino or Raspberry and a servo controller board like the PCA9685 is recommended.